(1. The raw material is too coarse, resulting in a slow feed speed;
(2. The crusher discharge port is unreasonable, resulting in poor discharge effect;
(3. The crusher liner is worn, resulting in reduced reliability and efficiency of the crusher;
(4. Hydraulic system failure, resulting in insufficient pressure in the oil tank or abnormal operation of the hydraulic cylinder.
(1. Adjust the crusher discharge port
According to the characteristics of the raw materials, adjust the position of the crusher discharge port and feed port to make the discharge more uniform and improve the efficiency of the crusher. At the same time, it is necessary to regularly check and clean the debris and accumulated stones at the discharge port to avoid affecting the crushing effect.
(2. Replace the crusher liner
The crusher liner is an important component of the crusher and has a direct impact on the efficiency of the crusher. After a period of use, the crusher liner will wear and lose its original crushing effect. Therefore, it is necessary to regularly check and replace the liner to ensure the efficiency and reliability of the crusher.
(3. Hydraulic system troubleshooting
The hydraulic system is an important part of the single-cylinder hydraulic cone crusher. It is necessary to regularly check the oil quantity and oil quality in the oil tank to ensure the normal operation of the hydraulic system. If a hydraulic system fault is found, it is necessary to deal with it in time, replace the faulty parts, and refill the oil.
(4. Other common fault solutions
If the single-cylinder hydraulic cone crusher has abnormal noise, vibration and other faults, it needs to be checked and handled in time. Specific methods include adjusting the support of the crusher, cleaning the debris in the crusher, checking the electrical system, etc.
In short, the maintenance of the single-cylinder hydraulic cone crusher requires attention to the maintenance and maintenance of each component. In daily use, the crusher needs to be checked and maintained regularly to avoid failures and reduce maintenance costs. Through the introduction of this article, I hope it will be helpful to workers and maintenance personnel using single-cylinder hydraulic cone crushers.
specialized in R&D and manufacturing of crushing, milling, screening, feeding, conveying, automation and other equipment.
