Cone crusher is a commonly used mining equipment, widely used in mining, chemical industry, road and bridge construction, construction and other industries. During use, it needs regular inspection and maintenance, among which the replacement of the fixed cone plate is a common operation.
Some specific tools are required to remove the cone crusher fixed plate, including wrenches, screwdrivers, rubber hammers, etc. Before disassembly, the cone crusher needs to be powered off and all accessories (such as wires, water pipes, etc.) need to be removed to ensure safety.
(1. Power off and empty: Before replacing the fixed cone plate, turn off the crusher power supply and empty the material.
(2. Remove the crushing shell: First unscrew the screws on the side of the cone crusher, and then tap it with a rubber hammer to loosen the fixed plate.
(3. Remove the fixed cone plate: Lift the fixed plate, and then remove the two screws under the fixed plate. Remove the screws above the fixed plate, and then remove the fixed plate from the cone crusher.
(4. Replace the fixed cone plate: Put the new fixed cone plate into the crusher, make sure it is in the correct position, and fix it with a screw.
(1. Pay attention to safety during disassembly, empty the material and turn off the power to avoid electric shock and random operation.
(2. When using a hydraulic knife, pay attention to safe operation to avoid hurting yourself or others.
(3. When replacing the fixed cone plate, make sure it is in the correct position to avoid affecting the working efficiency of the crusher.
(4. After disassembly, check whether all screws are tightened to avoid falling off.
(5. Carry out necessary tests to ensure the normal operation of the cone crusher.
In short, fixing the cone plate of the cone crusher is a relatively complicated task and requires special care and careful handling. Before disassembly, it is necessary to make adequate preparations and disassemble according to the correct operating steps. At the same time, it is necessary to pay attention to operational safety and related skills to avoid accidents or operational errors to ensure the normal operation of the cone crusher.
specialized in R&D and manufacturing of crushing, milling, screening, feeding, conveying, automation and other equipment.
